WADIA di122 & a315

WADIA di122 & a315
Konwerter DSD/DXD oraz 150-watowa integra to dwa nowe produkty marki należącej do tej samej grupy kapitałowej, która zarządza McIntoshem, Sonus faberem, Sumiko i Audio Research. Cena dekodera - 1500 funtów. Podobnie będzie chyba wyceniona integra. W kolejce do sprzedaży czekają też już monobloki a340 oraz końcówki a102

The Wadia di122 two-channel digital audio decoder integrates Wadia’s superior technical performance with our new Series 1 mini industrial design. Its sleek, modern aesthetic is compact in size to fit in virtually any location while complementing any surrounding.

It has two coaxial and two optical inputs that accept up to 24-bit/192kHz signals; a USB input accepts up to 32-bit signals and supports DSD64, DSD128, DXD 352.8kHz and DXD 384kHz. This vast array of inputs and supported formats allows music from an abundance of digital sources to be reproduced with the extreme precision and elegance expected from Wadia.

The truly exceptional sound quality is facilitated by both balanced and unbalanced variable analog audio outputs, offering premium noise rejection for optimal performance. The Wadia di122 also features a high powered headphone output, making it versatile choice for any listening experience.


Specifications

• Frequency Response: +/-0.5dB from 20Hz to 20,000Hz

• Total Harmonic Distortion: .005%

• Signal To Noise Ratio (A-Weighted): 105dB

• Variable Output Level: 0 – 4.0Vrms Unbalanced; 0- 8.0Vrms Balanced

• Dynamic Range: 98dB

• Output Impedance: Less than 100 ohms (Unbalanced and Balanced)

• Digital Input Signal Format: Coaxial and Optical Inputs – SPDIF (PCM); USB Input – PCM, DSD

• Digital Input Sample Rate

Coaxial and Optical: 44.1kHz to 192kHz, 24-Bit

USB: 44.1kHz to 384kHz, 32-Bit (PCM), DSD64, DSD128, DXD352.8kHz, DXD384kHz

• Digital Inputs

Coaxial 1 and 2: 0.5V p-p/75 ohms

Optical 1 and 2: – 15dbm to -21dbm (TOS Link)

USB: USB Type B Connector

• Trigger Input: 5-15VDC, less than 1mA

• Trigger Output: 12VDC, 25mA maximum total

• Power Requirements: 100-240 Volts, 50/60Hz at 10 Watts; Standby: Less than 0.5 watt

• Overall Dimensions: 10 inches (25.4cm) wide by 3-5/32 inches (8cm) high by 14 inches (35.6cm) deep

• Weight: 7 pounds (3.2 kg)


The Wadia a315 digital stereo amplifier provides 150 watts per channel at 8 ohms or 250 watts per channel at 4 ohms. It shares the same sleek, modern industrial design as the 321 decoding computer, making it a perfect amp to use with the 321. Both will blend nicely with virtually any room styling.

The a315 features some of the latest technology from Wadia. Frequency Switching Transmission™ (FST) is an adaptive modulation design in the amplifier circuitry that assures full output power is delivered over the entire audio spectrum. Signal Surveyor™ monitors the output signal and stops amplification if unsafe levels of DC voltage are detected, thus protecting your speakers.

Both balanced and unbalanced inputs are available for connecting your other system components. Specially designed 5-way binding posts will securely hold your speaker wire; they are designed for easy finger tightening and come with a special tool if even more snug connections are desired. A trigger input and output makes it simple to control the power state of your entire system when the a315 is turned on/off.

Specifications

• Power Output: 150 watts into 8 ohm loads; 250 watts into 4 ohm loads

• Output Load Impedence: 8 ohms or 4 ohms

• Rated Power Band: 20Hz to 20kHz

• Total Harmonic Distortion:

0.1% maximum harmonic distortion at any level from 250 milliwatts to one-half of rated power output, 20Hz to 20kHz;

0.5% maximum harmonic distortion at any level from one-half to full rated power output, 20Hz to 20kHz

• Dynamic Headroom: 1dB 8 ohm load; 1.6dB 4 ohm load

• Frequency Response: +0, -0.5dB from 20Hz to 20kHz; +0, -3.0dB from 10Hz to 70kHz

• Input Sensitivity: 2.4V Balanced; 1.2V Unbalanced

• A-Weighted Signal to Noise Ratio: 90dB (112dB below rated output) Balanced; 88dB (110dB below rated output) Unbalanced

• Intermodulation Distortion: 0.1% maximum if instantaneous peak power output does not exceed the rated output for any combination of frequencies from 20Hz to 20kHz

• Wide Band Damping Factor: Greater than 320, 8 ohm load; greater than 160, 4 ohm load

• Input Impedence: 10K ohms Balanced and Unbalanced

• Voltage Gain: 29dB

• Trigger Input: 5-15VDC
• Trigger Output: 12VDC, 50mA maximum, delayed 0.2 seconds

• Overall Dimensions: 17-7/8 inches (45.4 cm) wide by 3-3/8 inches (8.6 cm) high by 20 inches (50.8 cm) deep

• Weight: 27 pounds (12.2 kg)


Kategorie: NOWOŚCI

Skomentuj